Metrohm 797 VA Computrace - Manual (Page 99)

5.2 Working method specifications
797 VA Computrace – Software
87
already open) closed. It serves to start a determi-
nation using the working method and shows the
live display of the running determination curves.
MAIN WINDOW / Window / Determination curves (F8)
The DETERMINATION CURVES window will be
opened or (if it is already open) closed. It contains
determination and calibration curves of the loaded
determination and offers the possibility for recal-
culation and modification of the loaded deter-
mination.
MAIN WINDOW / Window / Results (F9)
The RESULTS window will be opened or (if it is al-
ready open) closed. It contains the full report of
the loaded determination.
MAIN WINDOW / Window / Sample table (F10)
The SAMPLE TABLE window will be opened or (if
it is already open) closed. (Only visible, if in GENE-
RAL SETTINGS/Automation tab Use sample table is
chosen for Working method source ).
5.2 Working method specifications
Load/save methods
Method files ( *.mth ) contain all the specifications and parameters
for running a determination.
MAIN WINDOW / File / New method (Ctrl+N)
Load a standard template with DP mode for creat-
ing a new method into the working memory.
MAIN WINDOW / File / Load method (Ctrl+O)
Load an existing method file into the working me-
mory. The name of the method loaded is displayed
in the status bar of the
MAIN WINDOW .
MAIN WINDOW / File / Save method (Ctrl+S)
Save the current method loaded in the working
memory. The old file will be overwritten.
MAIN WINDOW / File / Save method as ...
Save the current method loaded in the working
memory as a new file. Enter name and directory
for storage of the method file. If the file name al-
ready exists, windows asks if you want to over-
write the existing file.
797 VA COMPUTRACE / File / Export results ...
Save the full report of the current determination