Metrohm 797 VA Computrace - Manual (Page 255)

8.6 Analyze Electroplating Bath Solutions
797 VA Computrace – Software
243
Determination of the sample:
Choose "RC Sample with response curve" for Calibration tech-
nique.
Settings in the
DOSINOS window:
Checking Use for predose for Dosino 1, Electrolyte solution is
placed into the measuring vessel. Then, the measuring vessel is
emptied (only if
Add production bath to electrolyte on the tab
Determination of the window for CVS is not activated) and the
sample is placed.
The
determination tab of the window for CVS: