Metrohm 797 VA Computrace - Manual (Page 102)

5 Determination mode
797 VA Computrace – Software
90
Addition [ Manual, Automatic ; Manual ]
Selection of manual or automatic standard addi-
tion or recording of calibration curves:
Manual
Manual standard addition resp. recording of cali-
bration curves using a pipette.
Automatic
Automatic standard addition resp. recording of
calibration curves using one or several Dosing De-
vices.
Electrode Selection of electrode (see Electrodes, section
3.1).
Drop size Drop size for SMDE or HMDE (see Electrodes, sec-
tion 3.1).
Stirrer Stirrer settings (see Stirring, section 3.4).
Dosing Device settings (see Dosing Devices , sec-
tion 5.2 ).
Potentiostat settings (see Potentiostat, section
3.3).
Edit working method parameters (see
Determination, Voltammetric, Substances,
Calculations and Documentation).
Determination
The Determination tab of the EDIT WORKING METHOD PARAME-
TERS window contains general specifications for performing the
determination. The parameters displayed depend on the selected
Calibration technique and measurement Technique .