Metrohm 797 VA Computrace - Manual (Page 83)

4.2 Exploratory specification window
797 VA Computrace – Software
71
4.2 Exploratory specification window
Exploratory specification settings
The EXPLORATORY SPECIFICATION window contains all settings for
performing measurements in the exploratory mode. Most of the
settings are identical for exploratory and determination mode and
are therefore described in section 3.
Signal Selection of a signal file to be shown with
the
Selected signal properties . As long as a
signal is selected, the settings can not be ed-
ited.
By clicking the button < Edit >, the currently
loaded settings can be changed. The selec-
tion of the signal is repealed. The settings
can be transferred to the window
WORKING
METHOD SPECIFICATION .
Mode Selection of VA measurement mode, see VA
measurement modes section 3.2
Electrode see Electrodes, section 3.1