Metrohm 797 VA Computrace - Manual (Page 46)

2 Main window
797 VA Computrace – Software
34
Save settings
MAIN WINDOW / Settings / Save now
This function saves the actual settings of the soft-
ware: Open windows, window position and size,
general settings.
MAIN WINDOW / Settings / Save on exit
If this function is enabled, the software settings
are stored when the software is quit.
2.8 Window menu
Tiling of windows
MAIN WINDOW / Window / Tile
All opened windows are tiled.
Opening and closing of program windows
MAIN WINDOW / Window / Working method specification
(F6)
The WORKING METHOD SPECIFICATIONS window
will be opened or (if it is already open) closed (see
section 5.2)
(F6 only works, if the Main Window is
selected) .
MAIN WINDOW / Window / Monitor (F7)
The MONITOR window will be opened or (if it is
already open) closed (see section 5.3) (F7 only
works, if the Main Window is selected) .
MAIN WINDOW / Window / Determination curves (F8)
The DETERMINATION CURVES window will be
opened or (if it is already open) closed (see section
5.4)
(F8 only works, if the Main Window is selec-
ted) .
MAIN WINDOW / Window / Results (F9)
The RESULTS window will be opened or (if it is al-
ready open) closed (see section 5.5 (F9 only
works, if the Main Window is selected) ).
797 VA COMPUTRACE / Window / Sample table (F10)
The SAMPLE TABLE window will be opened or (if
it is already open) closed (see section 5.6) (F10
only works, if the Main Window is selected) .
MAIN WINDOW / Window / Exploratory specification (F11)
The EXPLORATORY SPECIFICATION window will
be opened or (if it is already open) closed (see sec-