Edit baseline – Metrohm 797 VA Computrace User Manual

Page 94

4 Exploratory mode

797 VA Computrace – Software

Charge (C)

Calculated charge

transmitted during this peak (is

depending from sweep rate and current).

Edit baseline

Modify the peak evaluation of an already found peak. The results
are displayed in the

PEAK SEARCH

window. This window is opened

by clicking the number of a found peak in the

PEAK SEARCH

win-

dow with the right mouse button and selecting the menu point

Edit peak

Begin

Manual setting of the start base point for baseline
calculation. The base point can be moved either
by manually changing the voltage value

(time with

CPVS)

in the first field or by clicking the

but-

tons of the second field indicating the current
value.

End

Manual setting of the end base point for baseline
calculation. The base point can be moved either
by manually changing the voltage value

(time with

CPVS)

in the first field or by clicking the

but-

tons of the second field indicating the current
value.

Type of baseline [ Linear, Polynomial, Exponential , Hori-

zontal ; Linear ]

Selection of the baseline type.

Scope [ Whole peak, Front end, Rear end ; Whole peak ]

Selection of the range for baseline evaluation.
This field can only be edited if the

Linear

baseline

type is selected.

Start peak evaluation with the current parameters
entered in the

EDIT PEAK

window.