Metrohm 797 VA Computrace - Manual (Page 112)

5 Determination mode
797 VA Computrace – Software
100
Open the CALCULATION window for edition of the
selected formula.
Delete the selected formula.
Note: There is no Calculation tab in the EDIT WORKING METHOD
PARAMETERS window, if you work with the CVS or CPVS modes
and the Calibration technique Standard addition plating bath.
Calculation Window
The CALCULATION window is opened if a new formula is added or
an existing formula is edited on the Calculations tab of the EDIT
WORKING METHOD PARAMETERS window. It contains the formula
and parameters for the calculation of a final result for a substance.
Formula
General calculation formula for the final result.
Name
User-defined name for the calculation formula.
Final unit
[ pg/L...g/L ; g/L ]
If mL is chosen as Sample unit on the Determina-
tion tab of the EDIT WORKING METHOD PARAME-
TERS window.
[ pg/kg...g/kg ; g/kg ]
If g is chosen as Sample unit on the Determination
tab of the EDIT WORKING METHOD PARAMETERS
window.
[ fL/L...mL/L ; mL/L ]
If you work with the modes CVS or CPVS.
Final result unit. Depending on the chosen units in the