Metrohm 797 VA Computrace - Manual (Page 146)

5 Determination mode
797 VA Computrace – Software
134
5.6 Sample table
The SAMPLE TABLE window shows the sample data of the loaded
sample table.
With 863 Compact VA Autosampler:
With 838 Advanced Sample Processor:
Pos. [ for 863: 1, 3, 5 ... 127; read only ]
[ for 838: 1, 2, 3 ... 112; read only ]
Position of the sample on the sample rack.
For the 863 Compact VA Autosampler , only
odd numbers are displayed, since for every sam-
ple, a vessel containing rinsing solution must be
placed at the even sample rack positions.
For the 838 Advanced Sample Processor, all num-
bers are displayed in the sample table. Starting
point on the sample rack is always the last po-
sition + 1 (after switching on the 838 it starts with
rack position 1). If you want to start with a differ-
ent position, enter the position of the first sample
vessel for the 838 parameter "SAMPLE" with the
838 keypad.