Metrohm 797 VA Computrace - Manual (Page 213)

7.4 Film deposition
797 VA Computrace – Software
201
Rinsing pump on (s)
Rinse for so many seconds. Start with clicking
, stop by clicking .
Number of rinsing cycles
Number of rinsing/siphoning cycles (after activat-
ing
Rinse cell system ). A cycle is siphoning and rin-
sing once. Length of siphoning and rinsing are de-
fined in
Siphoning pump on (s) and Rinsing pump
on (s) .
Rinse cell system
Siphon and rinse the cell system. Define settings in
Number of rinsing cycles , Siphoning pump on (s)
and Rinsing pump on (s) . Start with clicking
, stop with clicking .
Status
Displays current status of the pumps.
Rinsing/Siphoning - settings of the GENERAL SET-
TINGS/Automation tab (see Automation , section
2.7) are adopted to the PUMP CONTROL window.
7.4 Film deposition
Film deposition selection
MAIN WINDOW / Utility / Film deposition
Start Hg deposition for solid state electrodes in the
797 VA Computrace stand.
Film deposition window
The FILM DEPOSITION window serves for deposition of a mercury
or metal film on solid state electrodes at the 797 VA Computrace
stand.