Metrohm 797 VA Computrace - Manual (Page 86)

4 Exploratory mode
797 VA Computrace – Software
74
For the running voltage sweep there is a live dis-
play in the
EXPLORATORY CURVES window with
automatic scaling of the axes. Manual rescaling
can be done by pressing the button.
The red light at the left side of the button
indicates a current overload. In this case, stop the
measurement and change the measurement pa-
rameters.
In the second line of the status window comments
or error messages concerning the running meas-
urement are displayed.
A running measurement can be stopped, interrup-
ted and continued. Each step in the operation se-
quence can be abbreviated by clicking the
button.
Stop measurement
Stop running measurement immediately.
Hold measurement
Interrupt running measurement.
Continue measurement
Continue an interrupted measurement.
Next step
Go to next step in operation sequence.
4.3 Exploratory curves
Exploratory curves window
The EXPLORATORY CURVES window shows all curves of the signals
loaded and (if a voltage sweep is running) the live curve.