Metrohm 797 VA Computrace User Manual
797 va computrace
Table of contents
Document Outline
- 1 Introduction
- 2 Installation
- 2.1 Setting up the instrument
- 2.2 Installation of the 797 VA Computrace Stand
- 2.3 Multi-Mode Electrode (MME)
- 2.3.1 Construction and operating characteristics of the MME
- 2.3.2 Filling the MME with mercury
- 2.3.3 Mounting the capillary
- 2.3.4 Filling capillary without vacuum
- 2.3.5 Filling the capillary using vacuum
- 2.3.6 Storing the MME
- 2.3.7 Replenishing the mercury (without changing capillary)
- 2.3.8 Changing capillary
- 2.3.9 Cleaning the MME
- 2.4 Rotating disk electrode (RDE)
- 2.5 Reference electrode
- 2.6 Auxiliary electrode
- 2.7 Stirrer
- 2.8 Connection of Dosing devices
- 2.9 Connection of 863 Compact Autosampler
- 2.10 Connection of 838 Advanced Sample Pro cessor
- 2.11 Control lines
- 2.12 Connection of peripherals
- 2.13 Communication diagrams for automation
- 3 Safety
- 4 Appendix
- 4.1 Technical data
- 4.2 Scope of delivery
- 4.3 Options
- 4.3.1 General options
- 4.3.2 6.5327.000 MVA-Hg: Equipment for Hg-determination
- 4.3.3 6.5327.010 MVA-As: Equipment for As-determination
- 4.3.4 6.5327.020 MVA-CVS: Equipment for CVS/CPVS
- 4.3.5 Accessories for the automated addition of auxiliary solutions
- 4.3.6 Automation for trace analysis
- 4.3.7 Automation for electroplating bath analysis
- 4.4 Validation / GLP
- 4.5 Warranty and certificates
- 4.6 Index