Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 74)

Creating and Configuring Processor Files
5–7
10. If you wish to change the processor type or I/O configuration, press
CONFIG OFFLINE
CONFIG
OFFLINE
PRG/DOC
F1
.
The program directory of the offline processor file is displayed.
FILE PROTECTED NAME TYPE SIZE (words)
0 system *
1 reserved *
2 No ladder *
F1 F2 F6 F7 F3 F4 F8
PROCSSR
FUNCTNS
SAVE CREATE
REPORTS
FILE
OPTIONS
RETURN
TO MENU
CHANGE
FILE
MONITOR
FILE
Press a key, enter file number or file name
offline SLC 5/03 File EXAMPLE
PROGRAM DIRECTORY FOR PROCESSOR: EXAMPLE
F9 F10
DATA
MONITOR
MEMORY
MAP
The status line indicates that you are offline, the configured processor is an
SLC 5/03, and the processor file is
EXAMPLE .
11. Press
CONFIG OFFLINE
CONFIG
PROCSSR
FUNCTNS
F1
to modify a processor file. The following display appears:
F1 F2 F6 F7 F3 F4 F8
CHANGE
PROCSSR
CHANGE
PASSWORD
CREATE
FILE
DELETE
FILE
CHANGE
PR. NAME
CHANGE
FL. NAME
MONITOR
FILE
Press a key, enter file number or file name
offline SLC 5/03 File EXAMPLE
F5
CLEAR
MEMORY
F9 F10
DATA
MONITOR
FILE
PROTECT
You can now change the processor type or I/O configuration.
If you select an incompatible configuration, the message I/O
CONFIGURATION DOES NOT MATCH PROGRAM appears. After you make
a compatible selection, return to the processor functions menu.