Offline config – Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 User Manual
Page 155
Protection
8–13
FILE
TYPE
LAST ADDRESS
ELEMENTS WORDS
FILE PROTECTION
0
O output
O:2
1
1
1
I input
I:3
2
2
STATIC MEM-MOD
2
S status
S:82
83
83
STATIC MEM-MOD
3
B binary or bit
B3/15
1
1
MEM-MOD
4
T timer
T4:10
11
33
5
C counter
C5:10
11
33
CONSTANT
6
R control
R6:10
11
33
STATIC
7
N integer
N7:255
256
256
8
F floating
F8:0
1
2
PROCESSOR MEMORY LAYOUT
444 data words of memory used in 9 data table files
266 instruction words of memory used in 3 program files
11924 instruction words of unused memory available
Press a key to select protection
offline
SLC 5/03
File EXAMPLE
DATA TABLE MAP
File 8 only applies to
SLC 5/03 OS301,
OS302 and SLC 5/04
OS400, OS401
processors.
F2
F3
CONST
PROTECT
REMOVE
PROTECT
F10
MEMĆMOD
UNPRTCT
F1
STATIC
PROTECT
F9
MEMĆMOD
PROTECT
SLC 5/03 and SLC 5/04
processors only
If the processor type is not a SLC 5/03 or SLC 5/04, when you press [F10], Data
Protect the message:
DATA FILES CANNOT BE PROTECTED FOR THIS
PROCESSOR TYPE
appears.
Function Key
Description
[F1] Static Protect
Selects static data file protection.
[F2] Constant Protect
Selects constant data file protection.
[F3] Remove Protect
Removes static or constant data table file protection.
[F9] MemoryĆModule Protect
Selects memory module data table file protection.
[F10] MemoryĆModule Unprotect
Removes memory module data table file protection.
Use the
[Pg Dn]
or the
[Pg Up]
keys if you have more than one page of data
files.
2.
Select the form of protection by pressing either
CONFIG
OFFLINE
CONFIG
STATIC
PROTECT
F1
,
CONFIG
OFFLINE
CONFIG
CONST
PROTECT
F2
, or
CONFIG
OFFLINE
CONFIG
REMOVE
PROTECT
F3
. For this example static protection is applied to address R6:10.