Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 183)

Creating and Printing Reports
10–11
Processor Configuration Report
This option details the hardware configuration of the processor and associated
hardware in the system. There are no report parameters available. The report shows
the:
•
type of chassis (fixed or modular)
•
slot number
•
type of I/O module
This option is accessible from the Program Directory display by pressing
CONFIG OFFLINE
CONFIG
CREATE
REPORTS
F6
, then cursoring to the Processor Configuration report. Select the type of
report to print using [F2], Select All or [F3], Toggle Report then press [ENTER] .
The following display appears:
PRESS A KEY TO CONTINUE
offline SLC 5/03 File DRILL1
ROCKWELL SOFTWARE INCORPORATED
9323 SERIES SOFTWARE
SLC-500 DOCUMENTATION SOFTWARE
** REGENERATE PROCESSOR CONFIGURATION REPORT **
** PROCESSOR CONFIGURATION REPORT COMPLETE **
** DOCUMENT COMPLETE **
Archive File: DRILL1.ACH Report: PROCESSOR CONFIG
Output File: DRILL1.XRF Config:
Phase: COMPLETED Status: Successful Completion