Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 198)

Preface
Advanced Programming Software User Manual
11–4
Device Catalog Number
Fixed,
SLC 5/01
SLC 5/02 SLC 5/03 SLC 5/04 ML 1000 Page
1747ĆPIC
(DHĆ485)
1747ĆPIC Interface Converter • • • • ➀ NA 11-6
1784ĆKR (DHĆ485) 1784ĆKR Communication
Board
• • • • ➀ NA 11-8
1784ĆKL (DH +
Bridged)
1784ĆKL Communication
Interface Module
• • • • NA 11-10
1784ĆKT (DH +
Bridged)
1784ĆKT Communication
Interface Module
• • • • NA 11-11
KF3/KE
(FullĆDuplex)
1770ĆKF3 or 1747ĆKE
Gateway Device
• • • • NA 11-13
FullĆDuplex DF1 FullĆDuplex Protocol NA NA • • NA 11-19
HalfĆDuplex Slave DF1 HalfĆDuplex Protocol NA NA • • NA 11-23
FullĆDuplex
(Micro)
DF1 FullĆDuplex Protocol NA NA NA NA • 11-26
1784ĆKL (DH +
Direct)
1784ĆKL Communication
Interface Modules
NA NA NA • NA 11-28
1784ĆKT (DH +
Direct)
1784ĆKT Communication
Interface Modules
NA NA NA • NA 11-29
1784ĆKT2 (DH +
Direct)
1784ĆKT2 Communication
Interface Module
NA NA NA • NA 11-29
1784ĆKT2 (DH +
Bridged)
1784ĆKT2 Communication
Interface Module
• • • • NA 11-11
Interchange DH +
Direct
see footnote ➁ NA NA NA • NA 11-30
Interchange
DHĆ485
see footnote ➂ • • • • ➀ NA 11-32
Interchange DH +
Bridged
see footnote ➁➃ • • • • NA 11-33
NA= Not Applicable.
➀ An SLC 5/04 processor only can communicate using DHĆ485 protocol through Channel 0 via RSĆ232.
➁ A 1784ĆPCMK, ĆKTX, ĆKT, ĆKT2, or ĆKL interface card is required with this configuration and has to be
configured in the cfg_kt.ini file. See chapter 1 in this manual for details on how to configure this file.
➂ A 1747ĆPIC, 1784ĆKTX interface card, or 1784ĆPCMK card is required with this configuration and has
to be configured in the cfg_kt.ini file. See chapter 1 in this manual for details on how to configure this
file.
➃ Several types of bridging options are available. See page 11-33 for more information.