Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 109)

Preface
Advanced Programming Software User Manual
6–18
Paste
To paste a rung(s) stored in the temporary buffer, do the following:
1. Move the cursor to the place in the ladder program where the rungs are to be
inserted.
2. Press
CONFIG OFFLINE
CONFIG
PASTE
F4
. The rungs are placed in the program file above the current
rung.
The only limitation on the number of rungs you may cut or copy to the
temporary buffer is the amount of free disk space in your system. If insufficient
disk space exists, the system will display
DISK FULL and the cut or copy
operation will not be performed.
APS also allows you to paste between archive files. When pasting from one
processor to another, the system checks the paste buffer to insure that it does not
contain illegal instructions or addressing modes. If it does, the operation does
not occur and the following error message is displayed:
INSTRUCTION(S) IN PASTE BUFFER ARE INCOMPATIBLE WITH
CURRENT PROCESSOR
.