Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 174)

Preface
Advanced Programming Software User Manual
10–2
Types of Reports
You can create and print the following reports:
•
Program Listing — includes:
– the main program file and all subroutine files
– a single file
– a range of files
– a range of rungs within a single file
– a range of rungs between two or more files
You can also embed a Cross Reference report within the Program Listing report.
•
Cross Reference — provides an alphabetical list of addresses and their rungs, in
either address or symbol order.
•
Processor Configuration — details the configuration of the processor and
associated hardware in the system.
•
Data Tables — details the contents of the offline or online data files.
•
Instruction List (MicroLogix 1000 controllers only) — converts the contents of
a ladder program to an Instruction List format.
Each of these is discussed in detail in this chapter.
Conventions Used to Select Reports
Function keys allow you to select the types of reports you wish to create or print.
Function Key Description
[F2] Select All
Selects all of the reports. Asterisks appear before all the
reports.
[F3] Toggle Report Alternately selects and resets the cursored report.
[F4] Reset Reports
Resets all of the reports. There should be no asterisks before
the reports.
Note Once you have selected a report, an asterisk is placed in front of your selection.