Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 25)

Preface
Advanced Programming Software User Manual
1–18
Using the ReadMe File
The Advanced Programming Software contains a ReadMe file that covers
information made available after the time of printing of the documentation. Review
this file before using the software.
To view this file online, type: README
To print this file to printer port 1, type: README LPT1:
SupportPlus Remote Software Support Disks
Remote Software Support consists of a help utility (ABHELP) and a HOST
communications software package.
Remote Software Support must be installed separately. Use the INSTALL
command with the Remote Software Support disk. For more information, see
chapter 1 in the SupportPlus Remote Software Support User Manual, Publication
SUPS-6.5.8.
Transferring the Software Ownership
If any of the information provided to Rockwell Software changes, such as name,
company name, or mailing address, complete the postage prepaid Change of
Product Registration card and return it to Rockwell Software.
To alter this information stored electronically in the APS package, do the following:
1. Insert the disk labeled Disk 1 into the appropriate disk drive (either drive A or
B). For this example, we are using drive A.
2. Type: A:INSTALL TRANSFER , then press [ENTER] .
During the installation process, instructions appear on the screen to prompt you
through the procedure. Follow the instructions and type in the information
requested. You will not be prompted to re-enter the serial number. The serial
number can be entered only once for each APS package.