Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 211)

Configuring Your Programming Device for Online Communication
11–17
[F7] Phone Number
When you press
CONFIG OFFLINE
CONFIG
PHONE
NUMBER
F7
, the telephone directory will appear.
F9
Press a function key
SAVE TO
FILE
Name Phone Number
1
2
3
4
5
6
7
8
9
10
11
12
F5 F6
DELETE
LINE
UNDEL
LINE
F1
ENTER
NAME
F2
ENTER
PHONE #
ESC exits/Alt-U aborts changes
F3
SELECT
PHONE #
This lets you view all of the available phone numbers entered into the system. The
cursor is placed on the currently selected phone number. If no phone number is
selected, the cursor is placed on the first row with an empty phone number.
Function Key Description
[F1] Enter Name
Allows you to enter a description of the phone number. A
maximum of 30 characters may be entered.
[F2] Enter Phone Number
Allows you to enter the phone number. A maximum of 60
characters may be entered. However, only up to 37 characters
will be displayed. If a number greater than 37 is entered, three
dots appear to the right of the number. If a phone number
already exists, it is displayed on the command line.
[F3] Select Phone Number
Closes the Telephone Directory window and places the
cursored phone number in the KF3/KE/Modem/Full Duplex
configuration window.
[F5] Delete Line
Deletes the current name and phone number and places them
in a temporary buffer.
[F6] Undelete Line
Places the current name and phone number in the temporary
buffer on the cursored row, overwriting any data on that row.
[F9] Save to File
Allows you to save the established parameters to a user
configuration file that APS accesses to automatically set up
these parameters the next time you use the software.