Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 44)

Configuring Your System
3–5
Selectable Address Display
You have the option to select the method used to reference the physical addressing
of bit (data) files. Bit files include outputs (O), inputs (I), and binary (B). For each
file type, you can select between two address displays:
•
Word/Bit
•
Sequential
The following table shows the differences between the two types of displays:
Bit File Type Word/Bit Sequential Bit
Input
I1:2.0/10
I1:1.3/0
I1:2/10
I1:1/48
Output O0:0.1/1 O0:0/17
Binary
B3:5/10
B10:0/15
B3/90
B10/15
In addition you have the option of selecting short addressing for address display and
entry. Short addressing omits the file number and colon from the address. For
example, N13 is the short address of N7:13. See the Instruction Set Reference
Manual for more information.
Once you select the method(s) of display, it is applied to the database editor, create
reports function, and to the ladder display.
1. From the System Configuration display, press
CONFIG OFFLINE
CONFIG
ADDRESS
F4
. The function keys
toggle between Word/Bit and Sequential address display types. See the
following figure.