Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 12)

Installing the Software
1–5
Note If an EMS handler (such as EMM386) is installed, it must follow the EMS 4.0 and
VCPI specifications. If it does not, contact the manufacturer and obtain the latest
release. If you are using an EMS handler (or you want to use other switches than
those specified here) refer to the
ReadMe file included with this software. An
exception is the IBM PC-DOS 4.01, which has an EMS manager that is not VCPI
compatible.
If you are using one of the following EMS memory managers, make certain you use
the switch shown in the example below (or an equivalent):
DEVICE=EMM386 FRAME=NONE
DEVICE=386MAX NOFRAME
DEVICE=386MAX EMS=0
If you are using a QEMM memory manager, make certain you use the switch shown
in the example below (or an equivalent):
DEVICE= QEMM386.SYS FRAME=NONE
DEVICE= QDPMI.SYS