Allied Telesis AT-S83 - Manual (Page 96)

Chapter 5: Privileged Executive Mode Commands
96
UNDEBUG OSPF PACKET
Syntax
undebug ospf packet dd|detail|hello|ls-ack
|ls-request|ls-update|recv|send
no undebug ospf packet dd|detail|hello|ls-ack
|ls-request|ls-update|recv|send
Parameters
dd Specifies debugging for OSPF database information.
detail Sets the debug option to detailed information.
hello Specifies debugging for OSPF hello packets.
ls-ack Specifies debugging for OSPF link-state
acknowledgements.
ls-request Specifies debugging for OSPF link-state requests.
ls-update Specifies debugging for OSPF link-state updates.
recv Specifies the debug option set for packets received.
send Specifies the debug option set for packets sent.
Description
Use the DEBUG OSPF PACKET command to disable debugging options
for OSFP packets. Use the no form of this command to disable this
function.
Command Modes
Privileged Executive and Configuration Terminal modes
Examples
The following command disables the debug option for packets received:
switch(config)#undebug ospf packet recv
The following command disables debugging for OSPF hello packets:
switch(config)#undebug ospf packet hello