Allied Telesis AT-S83 - Manual (Page 222)

Chapter 11: 802.1x Access Control Commands
222
DOT1X TIMEOUT SERVER-TIMEOUT
Syntax
dot1x timeout server-timeout SECS <1-65535>
Parameters
SECS Indicates the number of seconds between reauthorization
attempts. The range is from 1 to 65,535 seconds. The default
is 30 seconds.
Description
Use the DOT1X TIMEOUT SERVER-TIMEOUT command to set the
authentication sever response timeout.
Command Mode
Interface mode
Example
The following commands set the reauthorization time on the server to 40
seconds on interface 7:
switch# configure terminal
switch(config)# interface xe7
switch(config-if)# dot1x timeout server-timeout 40
Related Commands
none