Allied Telesis AT-S83 - Manual (Page 130)

Chapter 6: Configuration Terminal Mode Commands
130
LOG TRAP
Syntax
log trap alerts|critical|debugging|emergencies|errors|
informational|notifications|warnings
no log trap
Parameters
trap Indicates logging limits to a specified level. Choose from
the following:
alerts Turns on logging for the emergency and the
alert levels.
critical Turns on logging for the alerts, emergencies,
and critical levels.
debugging Turns on logging for all of the other levels
and the debugging level. This is the most
comprehensive trap level.
emergencies Logs only the most severe messages.
errors Turns on logging for the emergencies, alerts,
critical levels. Also turns on the error level of
logging.
informational Turns on logging for the all of the levels
except debugging.
notifications Turns on logging for the emergencies, alerts,
critical, errors, warnings levels. Also turns on
logging for the notification level.
warnings Turns on logging for the emergencies, alerts,
critical, and errors levels. Also turns on
logging for the warning level.
Description
Use the LOG TRAP command to specify system message logging levels.
To the disable all of the levels of logging, use the no form of this
command.