Ip address – Allied Telesis AT-S83 User Manual

Page 211

AT-S83 Management Software Command Line Interface User’s Guide

211

IP ADDRESS

Syntax

ip A.B.C.D/m dhcp

Parameters

A.B.C.D/m

Enter an IP address and subnet mask in the following

format:

xxx.xxx.xxx.xxx/mask

dhcp

Indicates the switch uses a DHCP client to obtain an IP

address.

Description

Use the IP ADDRESS command to set an IP address for the switch or
specify that the switch uses a DHCP client to obtain an IP address.

Command Mode

Interface mode

Example

The following commands specifies the switch uses a DHCP client to obtain
an IP address on interface 5:

switch#configure terminal

switch(config)#interface xe5

switch(config-if)#ip dhcp

Related Commands

none