Allied Telesis AT-S83 - Manual (Page 293)

AT-S83 Management Software Command Line Interface User’s Guide
293
PASSIVE-INTERFACE
Syntax
passive-interface IFNAME
no passive-interface IFNAME
Parameters
IFNAME Specifies an interface name.
Description
Use the PASSIVE-INTERFACE command to block RIP broadcast on an
interface. The default is disabled. Use the no form of this command to
disable this function.
Command Mode
Router mode
Example
The following commands block RIP broadcasts on interface 2:
switch# configure terminal
switch(config)# router rip
switch(config-router)# passive-interface xe2
Related Commands
“SHOW IP RIP” on page 301