Allied Telesis AT-S83 - Manual (Page 237)

AT-S83 Management Software Command Line Interface User’s Guide
237
SHOW DOT1X STATISTICS INTERFACE
Syntax
show dot1x statistics interface IFNAME
Parameters
IFNAME Specifies the name of the interface.
Description
Use the SHOW DOT1X STATISTICS INTERFACE command to display
the vital statistics of an interface.
To modify the lines displayed, use the | (output modifier token); to save the
output to a file, use the > (output redirection token). For more information,
see the Command Line Interface Environment.
Command Mode
Privileged Executive mode
Example
The following example shows the SHOW DOT1X STATISTICS
INTERFACE and the resulting display:
switch# show dot1x statistics interface xe5
% Dot1x statistics for interface xe5 - 3
% EAPOL Frames Rx: 0 - EAPOL Frames Tx: 0
% EAPOL Start Frames Rx: 0 - EAPOL Logoff Frames Rx: 0
% EAP Rsp/Id Frames Rx: 0 - EAP Response Frames Rx: 0
% EAP Req/Id Frames Tx: 35 - EAP Request Frames Tx: 0
% Invalid EAPOL Frames Rx: 0 - EAP Length Error Frames Rx: 0
% EAPOL Last Frame Version Rx: 0 - EAPOL Last Frame Src:
0000.0000.0000
Related Commands
none