Allied Telesis AT-S83 - Manual (Page 210)

Chapter 10: IP Interface Commands
210
IP ACCESS-GROUP
Syntax
ip access-group access-list forward|in|out
Parameters
access-list Sets an access list. Choose from the following options:
forward Specifies forwarded packets.
in Specifies inbound packets.
out Specifies outbound packets.
Description
Use the IP ACCESS-GROUP command to set the type of packets that an
access list can accept.
Command Mode
Interface mode
Example
The following commands permit interface 7 to accept forwarded packets:
switch#configure terminal
switch(config)#interface xe7
switch(config-if)#ip access-group access-list forward
Related Commands
none