Allied Telesis AT-S83 - Manual (Page 80)

Chapter 5: Privileged Executive Mode Commands
80
SHOW INTERFACE STATUS ALL
Syntax
show interface status all
Parameters
none
Description
Use the SHOW INTERFACE STATUS ALL command to display the
status, speed, duplex mode, and type of all the interfaces on a switch.
Command Mode
Privileged Executive mode
Example
The following example displays the command and its resulting output:
switch#show interface status all
Port Name Status Speed Duplex Type
eth0 1000Base-T connected 1000 full unknown
xe1 interface1 connected 10G full XFP
xe2 interface2 connected 10G full XFP
xe3 interface3 connected 10G full XFP
xe4 interface4 connected 10G full XFP
xe5 interface5 connected 10G full XFP
xe6 interface6 connected 10G full XFP
xe7 interface7 connected 10G full XFP
xe8 interface8 connected 10G full XFP
Related Commands
“SPEED” on page 196