beautypg.com

Ip radius source-interface – Allied Telesis AT-S83 User Manual

Page 225

background image

AT-S83 Management Software Command Line Interface User’s Guide

225

IP RADIUS SOURCE-INTERFACE

Syntax

ip radius source-interface HOSTNAME PORT

no ip radius source-interface

Parameters

hostname

Specifies the radius client in the dotted IP address or

the hostname format.

port

Specifies the port number of the radius client. The
default port number is 1812.

Description

Use the IP RADIUS SOURCE-INTERFACE command to set the local
address which is sent in packets to the Radius server. Use the no form of
this command to clear the local address.

Command Mode

Configure mode

Example

The following commands set the port number of the radius client to port
1812 on a host called “myhost:”

switch# configure terminal

switch(config)# ip radius source-interface myhost 1812

Related Commands

none