Allied Telesis AT-S83 - Manual (Page 213)

213
Chapter 11
802.1x Access Control Commands
The switch implements the server side of the IEEE 802.1x Port-based and
MAC-based Network Access Control. This feature allows only authorized
users, or their network devices, access to network resources by
establishing criteria for each interface on the switch.
For 802.1x Access Control configuration information, see “Configuring
802.1x Access Control” on page 368.
This chapter contains the following commands:
ˆ “DOT1X MAX-REQ” on page 214
ˆ “DOT1X PORT-CONTROL” on page 215
ˆ “DOT1X QUIET-PERIOD” on page 216
ˆ “DOT1X REAUTHENTICATION” on page 217
ˆ “DOT1X REAUTHMAX” on page 218
ˆ “DOT1X SYSTEM-AUTH-CTRL” on page 220
ˆ “DOT1X TIMEOUT RE-AUTHPERIOD” on page 221
ˆ “DOT1X TIMEOUT SERVER-TIMEOUT” on page 222
ˆ “DOT1X TIMEOUT SUPP-TIMEOUT” on page 223
ˆ “DOT1X TIMEOUT TX-PERIOD” on page 224
ˆ “IP RADIUS SOURCE-INTERFACE” on page 225
ˆ “RADIUS-SERVER DEADTIME” on page 226
ˆ “RADIUS-SERVER HOST” on page 227
ˆ “RADIUS-SERVER KEY” on page 228
ˆ “RADIUS-SERVER RETRANSMIT RETRIES” on page 229
ˆ “RADIUS-SERVER TIMEOUT” on page 230
ˆ “SHOW DOT1X” on page 231
ˆ “SHOW DOT1X ALL” on page 232
ˆ “SHOW DOT1X INTERFACE” on page 235
ˆ “SHOW DOT1X STATISTICS INTERFACE” on page 237