Allied Telesis AT-S83 - Manual (Page 235)

AT-S83 Management Software Command Line Interface User’s Guide
235
SHOW DOT1X INTERFACE
Syntax
show dot1x interface IFNAME
Parameters
IFNAME Indicates the name of the interface.
Description
Use this command to display the state of a particular interface.
To modify the lines displayed, use the | (output modifier token); to save the
output to a file, use the > (output redirection token). For more information,
see the Command Line Interface Environment.
Command Mode
Privileged Executive mode
Example
The following command displays the state of interface 6.
switch# show dot1x interface xe6
The following is an output of the above command. See Table 14 on
page 233 for a description of the command parameters.
% 802.1X info for interface xe6
% portEnabled: true - portControl: Force Unauthorized
% portStatus: Unauthorized - currentId: 2
% reAuthenticate: disabled
% reAuthPeriod: 3600
% abort:F fail:F start:F timeout:F success:F
% PAE: state: Force Unauthorized - portMode: Force
Unauthorized
% PAE: reAuthCount: 1 - rxRespId: 0
% PAE: quietPeriod: 60 - reauthMax: 2 - txPeriod: 30
BE: state: Idle - reqCount: 0 - idFromServer: 0