Allied Telesis AT-S83 - Manual (Page 25)

AT-S83 Management Software Command Line Interface User’s Guide
25
that can be accessed from the VLAN Configuration command mode, see
Table 8. For more detailed information about the commands in the VLAN
Configuration mode, see Chapter 17, “VLAN Commands” on page 359.
Line Mode
Commands
To Line mode permits you to assign a console timeout, the length of the
console lines, and the user privilege level when creating a Telnet
connection. Access the Line mode through the Configuration Terminal
mode, with the LINE VTY command. The prompt changes to
“Switch(config-line)#” to indicate the Line mode.
For a list of commands that can be accessed from the Line mode, see
Table 9. For more information about this mode, see Chapter 16, “Line
Mode Commands” on page 355.
Table 8. VLAN Commands
Commands Description
SHOW VLAN Displays information about a particular
VLAN.
VLAN Creates a VLAN and enables it.
VLAN NAME Assigns a name to a VLAN.
VLAN STATE Sets the operational state of the VLAN.
Table 9. Line Mode Commands
Command Description
EXEC-TIMEOUT Sets the interval the command interpreter
waits for user input detected.
LINE CONSOLE Sets the primary terminal line.
PRIVILEGE Sets the access level to the AT-S83
commands.