Allied Telesis AT-S83 - Manual (Page 121)

AT-S83 Management Software Command Line Interface User’s Guide
121
ENABLE SECRET
Syntax
enable secret (8) LINE
Parameters
8 Specifies a hidden password will follow. This is an
optional parameter.
LINE Specifies a password for the Privileged Executive
Mode. Enter an alphanumeric value.
Description
This command assigns a privileged-level password, or secret. By default,
there is no password assigned. For information about the Privileged
Executive mode commands, see Chapter 5, “Privileged Executive Mode
Commands” on page 67.
Command Mode
Configuration Terminal mode
Example
The following command assigns “aloha5551212” as the hidden password:
switch#configure terminal
switch(config)#enable secret 8 aloha5551212
Related Commands
“SHOW RUNNING-CONFIG” on page 64