Allied Telesis AT-S83 - Manual (Page 242)

Chapter 12: Port Configuration
242
SHOW FLOWCONTROL INTERFACE
Syntax
show flowcontrol interface IFNAME
Parameters
IFNAME Specifies the name of the interface.
Description
Use the SHOW FLOWCONTROL INTERFACE command to display flow
control information on the interface specified.
Command Mode
View mode
Examples
The following example shows the SHOW FLOWCONTROL INTERFACE
command and the resulting display for interface 1:
switch# show flowcontrol interface xe1
The following is a sample output of the SHOW FLOWCONTROL
INTERFACE command displaying flow control information for interface 1:
switch# show flowcontrol interface xe1
Related Commands
none
Table 15. SHOW FLOWCONTROL INTERFACE Command
Port Send FlowControl Receive FlowControl RxPause TxPause
admin oper admin oper
xe1 on on on on 0 0