Allied Telesis AT-S83 - Manual (Page 311)

311
Chapter 15
Open Shortest Path First (OSPF)
Commands
This chapter contains the following commands:
ˆ “AUTO-COST REFERENCE-BANDWIDTH” on page 312
ˆ “COMPATIBLE RFC1583” on page 313
ˆ “HOST AREA” on page 314
ˆ “IP OSPF AUTHENTICATION” on page 316
ˆ “IP OSPF AUTHENTICATION-KEY” on page 317
ˆ “IP OSPF COST” on page 319
ˆ “IP OSPF DATABASE-FILTER” on page 320
ˆ “IP OSPF DEAD-INTERVAL” on page 322
ˆ “IP OSPF DISABLE ALL” on page 324
ˆ “IP OSPF HELLO-INTERVAL” on page 325
ˆ “IP OSPF MESSAGE-DIGEST-KEY” on page 326
ˆ “IP OSPF MTU” on page 328
ˆ “IP OSPF MTU-IGNORE” on page 330
ˆ “IP OSPF NETWORK” on page 331
ˆ “IP OSPF PRIORITY” on page 332
ˆ “IP OSPF RETRANSMIT-INTERVAL” on page 334
ˆ “IP OSPF TRANSMIT-DELAY” on page 335
ˆ “MAX-CONCURRENT-DD” on page 336
ˆ “MAX-UNUSE-PACKET” on page 337
ˆ “NEIGHBOR” on page 338
ˆ “NETWORK AREA” on page 340
ˆ “OSPF ABR-TYPE” on page 342
ˆ “OVERFLOW DATABASE” on page 344
ˆ “OVERFLOW DATABASE EXTERNAL” on page 346
ˆ “PASSIVE-INTERFACE” on page 348
ˆ “REFRESH TIMER” on page 349
ˆ “ROUTER OSPF” on page 350
ˆ “SUMMARY-ADDRESS” on page 351
ˆ “TIMERS SPF” on page 353