Allied Telesis AT-S83 - Manual (Page 358)

Chapter 16: Line Mode Commands
358
PRIVILEGE
Syntax
privilege level <1-15>
Parameters
level Specifies the privilege level. Choose from the following:
<1 - 15> Specifies a privilege level for a line mode.
Description
The PRIVILEGE command sets the level of access to the AT-S83
commands. Privilege levels 1 through 14 indicate an operator permission
level. As an operator, a user has limited right to commands. Only the
SHOW, HELP, and LOGOUT commands are available to a user with
operator privileges. Privilege level 15 indicates a manager (or system
administrator) permission level. A manager has access to all of the
commands on the system.
Command Mode
Configuration Terminal mode
Example
The following command sets the privilege level to 1:
switch#configure terminal
switch(config)#line console 0
switch(config-line)#privilege 1
Related Commands
none