Allied Telesis AT-S83 - Manual (Page 243)

243
Chapter 13
Spanning Tree Protocol (STP)
Commands
The commands in this chapter can be used in the Spanning Tree Protocol
(STP), Rapid Spanning Tree Protocol (RSTP), and Multiple Spanning Tree
Protocol (MSTP) daemons. For additional STP commands, see Chapter 9,
“Interface Configuration Mode Commands” on page 171.
This chapter contains the following commands:
ˆ “REGION REGION_NAME” on page 244
ˆ “REVISION REVISION_NUMBER” on page 245
ˆ “SHOW SPANNING-TREE” on page 246
ˆ “SHOW TRAFFIC-CLASS-TABLE INTERFACE” on page 249
ˆ “SPANNING-TREE ACQUIRE” on page 250
ˆ “SPANNING-TREE CISCO-INTEROPERABILITY” on page 251
ˆ “SPANNING-TREE ERRDISABLE-TIMEOUT” on page 252
ˆ “SPANNING-TREE FORWARD-TIME” on page 253
ˆ “SPANNING-TREE HELLO-TIME” on page 254
ˆ “SPANNING-TREE MAX-AGE” on page 255
ˆ “SPANNING-TREE MAX-HOPS” on page 256
ˆ “SPANNING-TREE MODE” on page 257
ˆ “SPANNING-TREE MST CONFIGURATION” on page 258
ˆ “SPANNING-TREE MST ENABLE” on page 259
ˆ “SPANNING-TREE PORTFAST BPDU-FILTER” on page 261
ˆ “SPANNING-TREE PORTFAST BPDU-GUARD” on page 262
ˆ “SPANNING-TREE PORTFAST BPDU-GUARD ENABLE” on
page 264
ˆ “SPANNING-TREE PRIORITY” on page 266
ˆ “SPANNING-TREE RSTP ENABLE” on page 267
ˆ “SPANNING-TREE STP ENABLE” on page 268