Allied Telesis AT-S83 - Manual (Page 171)

171
Chapter 9
Interface Configuration Mode
Commands
This chapter describes the commands in the Interface Configuration mode.
Each command in this chapter applies to a specified interface on the
switch.
This chapter contains the following commands:
ˆ “ARP-AGEING-TIMEOUT” on page 173
ˆ “BANDWIDTH” on page 174
ˆ “DESCRIPTION” on page 175
ˆ “FLOWCONTROL BACKPRESSURE” on page 176
ˆ “FLOWCONTROL RECEIVE” on page 177
ˆ “FLOWCONTROL SEND” on page 178
ˆ “IP ACCESS-GROUP” on page 179
ˆ “IP PROXY-ARP” on page 180
ˆ “MAC-ADDRESS” on page 181
ˆ “MDIX” on page 182
ˆ “MTU” on page 183
ˆ “MULTICAST” on page 184
ˆ “SHOW CLI” on page 185
ˆ “SHUTDOWN” on page 187
ˆ “SPANNING-TREE EDGEPORT” on page 188
ˆ “SPANNING-TREE FORCE-VERSION” on page 189
ˆ “SPANNING-TREE GUARD ROOT” on page 190
ˆ “SPANNING-TREE LINK-TYPE” on page 191
ˆ “SPANNING-TREE MST INSTANCE” on page 192
ˆ “SPANNING-TREE PATH-COST” on page 193
ˆ “SPANNING-TREE PORTFAST” on page 194
ˆ “SPANNING-TREE PRIORITY” on page 195
ˆ “SPEED” on page 196
ˆ “STATIC-CHANNEL-GROUP” on page 198
ˆ “STORM-CONTROL” on page 199
ˆ “SWITCHPORT ACCESS VLAN” on page 201