beautypg.com

Ip rip send version – Allied Telesis AT-S83 User Manual

Page 284

background image

Chapter 14: Routing Information Protocol (RIP) Commands

284

IP RIP SEND VERSION

Syntax

ip rip send version 1|1-compatible|2

no ip rip send version 1|1-compatible|2

Parameters

1

Specifies the acceptance of RIP version 1 packets.

1-compatible Specifies the acceptance of RIP version 1 compatible

packets.

2

Specifies the acceptance of RIP version 2 packets.

Description

Use the IP RIP SEND-VERSION command to send a specified version of
RIP packets on an interface. This command overrides the setting of the
VERSION command.

Use the no form of this command to use the setting specified with the
VERSION command.

Command Mode

Interface mode

Example

The following command enables RIP version 2 packets to be sent on
interface 7:

switch#configure terminal

switch(config)#interface xe7

switch(config-if)#ip rip send version 2

Related Commands

“VERSION” on page 308