Allied Telesis AT-S83 - Manual (Page 82)

Chapter 5: Privileged Executive Mode Commands
82
SHOW NTP STATUS
Syntax
show ntp status
Parameters
none
Description
Use the SHOW NTP STATUS command to display information
about NTP.
Command Mode
All modes
Example
The following example shows the SHOW NTP STATUS command and a
sample of the output:
switch#show ntp status
Clock is unsynchronized, stratum 16, reference is INIT
actual frequency is 0.0000 Hz, precision is 2**-19
reference time is 00000000.00000000 ( 6:28:16.000 UTC Fri
Feb 7 2007)
clock offset is 0.000msec, root delay is 0.000 msec
root dispersion is 3540.000 msec.
Related Commands
“SHOW NTP ASSOCIATIONS DETAIL” on page 81