Allied Telesis AT-S83 - Manual (Page 21)

AT-S83 Management Software Command Line Interface User’s Guide
21
Privileged
Executive
Command Mode
The Privileged Executive command mode is the default command mode
for the manager login. The commands in this mode permit you to perform
system level commands such as rebooting the system, copying
configuration files, and clearing statistics. The prompt changes to
“Switch#” to indicate the Privileged Executive mode.
To access the View mode from the Privileged Executive mode, enter the
EXIT command. To return to the Privileged Executive mode, enter the
ENABLE command.
See Table 4 for a sample list of commands that can be access from the
Privileged Executive command mode. For detailed information about the
commands in this mode, see Chapter 5, “Privileged Executive Mode
Commands” on page 67.
Table 4. Privileged Executive Command Mode Commands
Command Description
BOOT CONFIG-
FILE Reboots the system.
CONFIGURE
TERMINAL Changes the mode to the Configuration
Terminal Mode.
COPY Uploads the configuration file to an image or
configuration file.
DISABLE Exits the Privileged Executive command mode.
PING IP Pings an IP address to check connectivity to
another system.
REBOOT Reboots the system.
SHOW
INTERFACE Displays interface configuration and status.