Allied Telesis AT-S83 - Manual (Page 288)

Chapter 14: Routing Information Protocol (RIP) Commands
288
MAXIMUM-PREFIX
Syntax
maximum-prefix MAXPREFIX <1-65535> THRESHOLD <1-100>
no maximum-prefix MAXPREFIX <1-65535>
Parameters
MAXPREFIX Indicates the maximum number of RIP routes
allowed. Specify a value between 1 and 65,535.
THRESHOLD Indicates the percentage of maximum routes that
generate a warning. Specify a value between 1 to
100%. The default threshold is 75%. This is an
optional parameter.
Description
Use the MAXIMUM-PREFIX command to configure the maximum prefix. If
only one parameter is specified, the software interprets it as the
MAXPREFIX value. Use the no form of this command to stop limiting the
number of RIP routes in the routing table.
Command Mode
Router mode
Example
The following commands set the maximum prefix to 150 and the threshold
to 80%:
switch#configure terminal
switch(config)# router rip
switch(config-router)#maximum-prefix 150 80
Related Commands
none