Allied Telesis AT-S83 - Manual (Page 123)

AT-S83 Management Software Command Line Interface User’s Guide
123
FIB RETAIN
Syntax
fib retain forever|time
Parameters
forever Indicates the system permanently retains the FIB value.
time Indicates time, in seconds, that the system retains FIB after
RTM restarts. Specify 1 to 65535 seconds.
Description
Use the FIB RETAIN command to specify the length of time the switch
retains the FIB during an RTM restart. By default, the software does not
save the FIB.
Command Mode
Configuration Terminal mode
Example
The following commands retain FIB for 5,000 seconds after an RTM
restart:
switch#configure terminal
switch(config)#fib time 5000
Related Commands
none