Allied Telesis AT-S83 - Manual (Page 228)

Chapter 11: 802.1x Access Control Commands
228
RADIUS-SERVER KEY
Syntax
radius-server key KEY
no radius-server key KEY
Parameters
KEY The secret key shared among the radius server and the 802.1x
client. Enter a value between x and y. Special characters such
as “*,” “_,” and “!” are permitted.
Description
Use the RADIUS-SERVER KEY command to set the shared secret key
between a Radius server and a client.
To erase the current value of the secret key, use the no form of this
command. This command has no default value.
Command Mode
Configure mode
Example
The following commands set the shared secret key to “ipi:”
switch# configure terminal
switch(config)# radius-server key ipi
Related Commands
none