Allied Telesis AT-S83 - Manual (Page 78)

Chapter 5: Privileged Executive Mode Commands
78
SHOW FLOWCONTROL INTERFACE
Syntax
show flowcontrol interface INTERFACE
Parameters
INTERFACE Specifies the name of an interface.
Description
Use the SHOW FLOWCONTROL INTERFACE command to display flow
control information.
To modify the lines displayed on the screen, use the | (output modifier
token). To save the output to a file, use the > (output reduction token).
Command Mode
Privileged Executive mode
Example
The following command displays flow control information on interface 4:
switch#show flowcontrol interface xe4
The following is a sample output of the SHOW FLOWCONTROL
INTERFACE command.
Related Commands
none
Table 13. SHOW FLOWCONTROL INTERFACE Command
Port Send FlowControl Receive FlowControl RxPause TxPause
admin oper admin oper
------------- ------------- ------------- ------------- ------------- ------------- -------------
xe1 on on on on 0 0