Allied Telesis AT-S83 - Manual (Page 143)

AT-S83 Management Software Command Line Interface User’s Guide
143
NTP TRUSTED-KEY
Syntax
ntp trusted-key <1- 4294967295>
no ntp trusted-key <1- 4294967295>
Parameters
none
Description
Use the NTP TRUSTED-KEY command to specify a key number for a
trusted time source. You must first define a key number with the NTP
AUTHENTICATION-KEY command. Enter a value between 1 and
4294967295.
By default, no trusted keys are defined. To disable the authentication of a
device, use the no form of this command.
Command Mode
Configuration Terminal mode
Example
The following commands set the trusted key to 222,222:
switch#configure terminal
switch(config)#ntp trusted-key 222222
Related Commands
“NTP AUTHENTICATE” on page 137
“NTP AUTHENTICATION-KEY” on page 138