Allied Telesis AT-S83 - Manual (Page 62)

Chapter 4: View Mode Commands
62
SHOW INTERFACE SWITCHPORT
Syntax
show interface switchport all
Parameters
none
Description
Use the SHOW INTERFACE SWITCHPORT command to display the
status of the 8 10-Gigabit ports.
Command Mode
View mode
Example
The following is an example of the SHOW INTERFACE SWITCHPORT
command and the sample output:
switch#show interface switchport
Interface name: xe1
Switchport mode: access
Ingress filter: enable
Acceptable frame types: all
Default Vlan: 1
Configured Vlans: 2
Interface name: xe2
Switchport mode: access
Ingress filter: enable
Acceptable frame types: all
Default Vlan: 1
Configured Vlans: 2
Interface name: xe3
Switchport mode: access
Ingress filter: enable
Acceptable frame types: all
Default Vlan: 1
Configured Vlans: 3
Interface name: xe4
Switchport mode: access
Ingress filter: enable
Acceptable frame types: all
Default Vlan: 1
Configured Vlans: 3