Allied Telesis AT-S83 - Manual (Page 195)

AT-S83 Management Software Command Line Interface User’s Guide
195
SPANNING-TREE PRIORITY
Syntax
spanning-tree priority <0-240>
no spanning-tree priority
Parameters
priority Specifies the bridge priority of an interface. Enter a value
from 0 to 240 in increments of 16.
Description
Use the SPANNING-TREE PRIORITY command to define interface
priority. A lower priority value indicates a greater likelihood of the interface
becoming a root. Use the no form of this command to reset the command
to its default value.
Command Mode
Interface mode
Example
The following commands assign interface 2 with a bridge priority of 200:
switch#configure terminal
switch(config)#interface xe2
switch(config-if)#spanning-tree priority 200
Related Commands
none