Allied Telesis AT-S83 - Manual (Page 110)

Chapter 6: Configuration Terminal Mode Commands
110
DEBUG OSPF EVENTS
Syntax
debug ospf events abr|asbr|lsa|nssa|os|router|vlink
no debug ospf events
Parameters
abr Displays ABR events.
asbr Displays ASBR events.
lsa Displays Link State Advertisements (LSA) events.
nssa Displays NSSA events.
os Displays OS interaction events.
router Displays other router events.
vlink Displays virtual link events.
Description
Use the DEBUG OSPF EVENTS command to enable OSPF debugging
options. The DEBUG OSPF EVENT command enables the display of
debug information related to OSPF internal events. Use this command
without any parameters to turn on all of the options.
Use the no form of this command or the UNDEBUG OSPF EVENT
command to disable this function.
Command Modes
Privileged Executive and Configuration Terminal modes
Examples
The following command enables all of the OSPF debugging options:
switch(config)#debug ospf events
The following command enables the display of OS interaction events on
the console:
switch(config)#debug ospf events os